| Description | HPL Laminate doors are built-to-order, suitable for interior locations |
|---|---|
| NAAMM / HMMA | None |
| SDI | II/1, III/1, IV/1 (Open Seam Edge) II/2, III/2, 3, IV/2 (Seamless Edge) (per A250.8-2003, Level / Model) |
| Material | 1. Cold Rolled Steel 2. A60 or G90 Galvanized 3. Stainless Steel |
| Faces | 18, 16, 14 or 12 GA |
| Door Edges | 1-3/4" thick, beveled, 1/8" in 2" |
| Vertical Edges | 1. Welded 3" OC, Seamless 2. Continuous Welded, Seamless 3. Open Seam See Vertical Door Edges |
| Top / Bottom | 16 GA Channels See Door Top & Bottoms |
| Reinforcements | Hinges: 7 GA, 1-1/2" X 10" Locks: 11 GA or equal # threads Closers: 14 or 12 GA |
| Core | Various, per Spec |
| STC | See Sound Control |
| Fire Rating | See Fire Rated |
| Bullet Resistant | See Bullet Resistant |
| STD Primer | Gray, EPA Approved, Alkyd, zinc compound primer, standard finish paint also available See Finishes |
| Edge Finish | Factory Finish Painted Door Edges to Match Laminate |
NOTE: Above door data varies depending on specific design criteria.
