Engineered for Pharmaceutical, Medical, Hi-Tech, and all other laboratory and clean room applications.
Seamless - continuously welded on all 4 door edges.
Available in a variety of configurations, sizes, and styles, with or without glass lites.
Flush and sloped stop glazing options to repel bacteria and shed water during wash-down / cleaning operations.
Designed for high frequency use without sacrificing appearance.
Cold Rolled, A60 or G90 Galvanized available factory finish painted.
Hybrid options available including bullet-resistant and fire rated.

Construction
Description	Lab-Tek doors are built-to-order, suitable for both interior and exterior locations.
NAAMM / HMMA	802, 810, 850
Material	1. Cold Rolled Steel 2. A60 or G90 Galvanized
Faces	18, 16, 14 or 12 GA
Door Edges	1-3/4" thick, beveled, 1/8" in 2"
Vertical Edges	Continuous Welded all 4 edges Hermetically Sealed See Vertical Door Edges
Top / Bottom	16 GA, Sealed all 4 edges See Door Top + Bottom Details
Reinforcements	Hinges: 7 GA, 1-1/2" X 10" Locks: 11 GA or equal # threads Closers: 14 or 12 GA
Service Temp	-20° to 150° (F)
Core	Varies, depending on application
STC	Available (Contact factory)
Fire Rating	See Fire Rated
Bullet Resistant	See Bullet Resistant
Finishes	Gray, EPA Approved, Alkyd, zinc compound primer, standard. Finish paint also available. See Finishes

NOTE: Above door data varies depending on specific design criteria

Lab-Tek™ Steel Clean Room Doors